Your roof in Jordan goes through sharp seasonal changes, from a hot, dry summer to a cold, rainy winter, and over time the effects of heat or rainwater start to show inside the building. A hot top floor, damp patches on the ceiling, cracked paint or water coming in after a storm are not just cosmetic problems — they can mean the roof needs proper treatment and insulation before the damage gets worse. Al Tamayuz provides roof insulation in Amman and across Jordan with waterproofing, thermal insulation and foam systems, inspecting the roof first and choosing the right solution for the building and the problem. We serve areas of Amman such as Khalda, Jubeiha, Marj Al-Hamam, Abdoun, Dabouq and more. To book an inspection, call or message us on WhatsApp: 0799 747 365.
Do you have any of these problems with your roof?
- Rooms directly under the roof get very hot in summer.
- Rainwater leaks in, leaving damp patches or yellow stains on ceilings and walls.
- Heavier reliance on air conditioning and higher electricity bills because heat passes through the roof.
- Cracks in the roof layers or tiles that let water into the building structure.
- Peeling paint or a damp smell after it rains.
- Leaks repaired again and again from inside without treating the real cause on the roof.
If you notice one or more of these signs, it is best to inspect the roof before choosing an insulation material. Sometimes the problem is the old insulation layer; sometimes it is the roof slope, the joints and cracks, or the drainage points.
Our roof insulation services
Roof waterproofing
Roof waterproofing solutions that protect the building from rainwater and damp, treating weak points, joints and areas where water collects before the right waterproofing system is applied.
Thermal roof insulation
Thermal roof insulation reduces the amount of solar heat that reaches the inside of the home, especially on the top floor, improving comfort and easing the load on air conditioning.
Polyurethane foam insulation
Polyurethane foam insulation is a practical choice when you need one continuous layer that helps with both thermal insulation and waterproofing. The thickness and application method are set according to the roof’s condition and the site requirements.
Treating and repairing roof leaks
Adding a new insulation layer is sometimes not enough until the source of the problem is known. Our experience in leak detection without breaking helps us link the signs of damp to their likely source, then treat the cracks or water entry points before completing the insulation.
The insulation types we use
Waterproofing: depending on the roof, we may use bitumen membranes, polymer-modified cementitious systems or other suitable waterproofing membranes. The choice is not about the product name alone — it depends on the roof’s condition, its slopes, whether it is tiled, where it drains and how it is used.
Thermal insulation: options include sprayed polyurethane foam, polystyrene boards, and some heat-reflective coatings and layers. We choose the best solution after the inspection, because the needs of a villa roof in Dabouq can differ from those of an apartment building in Jubeiha or a house in Marj Al-Hamam.
How we insulate a roof
- Roof inspection: we review the condition of the roof, any cracks, how rainwater drains and any signs of previous leaks.
- Preparing and cleaning the roof: dust and weak sections are removed and anything necessary is treated before the insulation is applied, because good preparation directly affects the result.
- Applying the insulation system: we apply the agreed material or system according to the roof’s condition and the type of insulation needed — waterproofing, thermal or foam.
- Quality check: we review the coverage, joints, edges and drainage points and make sure no weak areas need further treatment.
- Handover and warranty: we explain what was done and how to look after the roof. The warranty can reach up to 10 years depending on the insulation system, the material and the roof’s condition, and the final period is stated clearly in the service quote.
Why choose Al Tamayuz for roof insulation?
- Hands-on experience with water leaks and damp in homes and buildings across Jordan.
- An inspection to find the cause of the problem before an insulation system is proposed.
- Insulation materials and systems suited to the roof and to Jordan’s climate.
- The option to combine leak treatment with insulation instead of treating the symptoms only.
- Specialised technicians who prepare the roof properly instead of adding a quick surface coat.
- A clear scope of work with no hidden costs.
- A written warranty based on the agreed system.
- Service in Amman and many areas of Jordan, with inspections arranged quickly.
To contact Al Tamayuz and book an inspection, call or message us on WhatsApp at 0799 747 365.
What affects the cost of roof insulation?
There is no single price for every roof, so the cost is set after the inspection. The final price depends on several key factors:
- The actual roof area that needs insulating.
- The type of insulation: waterproofing, thermal, foam, or a system that combines more than one.
- The current condition of the roof and whether it has old insulation layers or tiles.
- Whether cracks need repairing or leak points need treating before insulation.
- The material and the thickness of the layers required.
- Roof details such as tanks, AC bases, edges and drains.
We give you a clear assessment before any work, and any cost is based on the actual inspection and what your roof needs — not on a general figure that may not fit your case.
Roof insulation in Jordan: FAQ
What is the best type of roof insulation for Jordan’s climate?
No single type is best for every building. Roofs that suffer from rainwater need waterproofing first, while roofs exposed to strong sun may benefit from a thermal system or a foam that does more than one job. An inspection is the right way to choose.
How long does roof insulation last?
It depends on the material, the quality of preparation and application, how the roof is used and its exposure to the weather. Some systems can carry a warranty of up to 10 years; the exact period depends on the system installed.
Can a roof be insulated over the tiles without breaking?
In some cases, yes — if the tiles are firm and the roof’s condition allows a suitable system to be applied on top. Loose tiles or water trapped underneath may need a different treatment, so the roof must be inspected first.
How long does roof insulation take?
It depends on the roof’s size and condition, the type of insulation and how much repair is needed before application. After the inspection we can give you a realistic timeline instead of one fixed time for every case.
Is there a warranty on roof insulation?
Yes. The warranty is explained before work starts, based on the insulation system, the material and the roof’s condition. It can reach up to 10 years with suitable systems, and the final period is stated in the service quote.
How is roof insulation related to water leaks?
Failed insulation, or cracks and joints in the roof, can let rainwater reach the building layers and show up as damp inside. If the source of the water is not clear, you can start with our water and tank leak detection service to find the problem before insulating.
Book an inspection for your roof
If you are looking for a roof insulation company in Amman or need roof waterproofing and thermal insulation in Jordan, contact Al Tamayuz to explain the problem and arrange an inspection. We will help you decide whether the roof needs leak treatment, waterproofing, thermal insulation or foam before any work begins.
You can also explore Al Tamayuz services or see our service areas in Amman.
Protecting your roof from winter rain
Before the rainy season, read our practical guide to waterproofing roofs against rain in Jordan to learn the signs of failing insulation, how to check drains and edges, and the mistakes to avoid before any work.
Frequently asked questions
Can the service be done without breaking?
In many cases, yes. We locate the leak with detection devices before any opening, and if the repair itself needs an opening, it is limited to the exact point.
How long does the inspection take?
It depends on the size of the property, the complexity of the network and the nature of the case. We give you an estimate once you describe the problem.