Water leaks are one of the most common problems facing homes and buildings in Jordan. They often start small, then become a direct cause of a higher water bill, damp, and damaged walls or floors if they are not dealt with quickly.
In many cases the leak is not clearly visible, so finding it depends on careful observation or on modern devices that locate the problem without random breaking.
In this article we look at the main types of water leaks and how to deal with each one properly.
1. Leaks in internal pipes
Pipe leaks are among the most common inside the home, and they usually happen because of:
- Pipes corroding over time
- Weak connections
- High water pressure
- Old or unsuitable plumbing materials
The signs of this type of leak usually include:
- Lower water pressure
- Damp appearing inside the walls
- The sound of water inside a wall
- An unusually high water bill
How is it dealt with?
The leak is first located precisely, then the damaged section is repaired or replaced before the damage spreads to other parts of the network.
2. Leaking taps and faucets
A leaking tap may look minor, but over time it wastes a large amount of water.
The causes are usually:
- A worn internal washer
- A corroded valve
- Loose connections
Even a small, constant drip can noticeably raise your monthly consumption.
The right fix
- Replacing the internal parts
- Tightening the connections
- Replacing the tap if it is very old
3. Water tank leaks
Tank leaks are very common, especially in homes that rely on roof tanks.
The signs include:
- Water constantly running down near the tank
- The tank overfilling
- The constant sound of flowing water
The causes may be:
- A faulty float valve
- Weak joints
- A crack in the tank body itself
What should you do?
It is best to inspect the tank regularly, because a continuing tank leak can waste a very large amount of water.
4. Leaks under the tiles
This is one of the most serious types of leak, because it is usually not visible.
Important signs include:
- Lifting or bulging tiles
- A damp smell
- A floor that feels unusually warm or cold
- A floor that stays wet
In this case, modern detection devices should be used to locate the break precisely.
5. Leaks in walls and ceilings
These usually appear because of:
- A leak in the internal network
- A leak from the roof
- Poor waterproofing
The signs include:
- Yellow stains
- Peeling paint
- A persistent damp smell
How to deal with any water leak quickly
1. Watch the meter
If the meter keeps moving while all the water is off, there is a leak.
2. Do not put off the repair
Every day of delay means more damage.
3. Use professional detection
Modern devices locate the leak without breaking.
4. Inspect the network regularly
Regular inspections save a lot of money.
Why should leaks be treated early?
Because delay can cause:
- Damaged floors
- Cracked walls
- A higher water bill
- A weaker internal structure
Al Tamayuz Water Leak Detection
If you notice any sign of a leak, an early inspection will save you a lot of money.
Al Tamayuz uses modern devices that help to:
- Locate the leak precisely
- Find the leak without random breaking
- Limit the damage
- Deliver a fast, effective solution
Call us on 0799 747 365